Single and double-acting
Standard CETOP RP52P DIN/ISO 6432
Stainless steel rod and tube
Anodized AL end-blocks
[B]Type of construction: [B]flanged
[B]Operation:[B] single-acting or double-acting
[B]Materials:[B] end-blocks = anodized AL, tube and rod = stainless steel, piston = AL, seals = NBR - PU, other parts = see coding
[B]Brackets: [B]screw, flange, feet, trunnion
[B]Stroke min – max:[B] ø 16: 10...
Read more.
Single and double-acting
Standard CETOP RP52P DIN/ISO 6432
Stainless steel rod and tube
Anodized AL end-blocks
[B]Type of construction: [B]flanged
[B]Operation:[B] single-acting or double-acting
[B]Materials:[B] end-blocks = anodized AL, tube and rod = stainless steel, piston = AL, seals = NBR - PU, other parts = see coding
[B]Brackets: [B]screw, flange, feet, trunnion
[B]Stroke min – max:[B] ø 16: 10 - 600 mm; ø 20 - ø 25: 10 - 1000 mm
[B]Bores:[B] ø 16, 20, 25
[B]Operating temperature: [B]0°C to 80°C
(with dry air -20°C)
[B]Operating pressure: [B]1 to 10 bar (double-acting);
2 to 10 bar (single-acting)
[B]Fluid: [B]Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISO VG32. Once applied the lubrication should never be interrupted.
[B]Speed: [B]10 to 1000 mm/sec (without load)