Applications:
Transport of liquid or semi-liquid food products at high temperatures by pulse or suction
Designed to resist pressure or vacuum
Recommended when a smaller bend radius is required
Properties:
Odourless, tasteless and completely non-toxic
White smooth inner, purple smoot outer
Can be equipped with 316L stainless steel fittings on each end with a roughness value of less than 0.8mm(or...
Read more.
Applications:
Transport of liquid or semi-liquid food products at high temperatures by pulse or suction
Designed to resist pressure or vacuum
Recommended when a smaller bend radius is required
Properties:
Odourless, tasteless and completely non-toxic
White smooth inner, purple smoot outer
Can be equipped with 316L stainless steel fittings on each end with a roughness value of less than 0.8mm(or 0.5mm on request)
Operational temperature range from -20°C(-4°F) to+100°C(+212°F), may reach up to +120°C(+248°F)
Can be sterilised at +130°C(+248°F) for a maximum of 30 minutes
Available at a maximum length of 40m
Construction
Butyl food grade inner and EPDM cover. Equipped with two textile reinforcements inside the wall of the tube and a double steel spring wire and copper braiding which prevents discharge of static electricity.
Regulations:
Butylic rubber produced in compliance with:
US FDA Standard 21 CFR 177.2600
German BfR Standard part XXI Cat 2
ResAp 2004(5), according to Reg 1935/2004/EEC, and Reg 10/2011/EEC
3A Sanitary Standard 18-03 Class III (hose)
Butylic rubber used is in accordance with EU Directive 2002/95/ECC for restriction of the use of Hazardous Substances (RoSH)