Sensor interfaces

About Us
Products
Services
News
Help
Contact

+44 (0) 33 000 22 223

My Basket (0) £ 0.00

Product Sections

1 - Hydraulics
2 - Hydraulic Quick Release Couplings
3 - Pneumatic Quick Release Couplings
4 - Air Preparation Monitor & Test
5 - Festo
6 - KELM Pneumatics
7 - Pneumatic & Vacuum Equipment
8 - Valves
9 - Ring Main Systems
10 - Adaptors & Fittings
11 - Stainless Steel
12 - Malleable Iron
13 - Hose, Tubing & Couplings
14 - Clamps & Clips
15 - Sprays & Adhesives
16 - Blow Guns & Vacuum
17 - Wash Down & Fuelling
18 - Air Tools
19 - Tools, Hardware & PPE

Download Microsoft Edge

Looks like you're using Internet Explorer

We no longer support this browser and recommend updating to the latest version of Microsoft Edge .

Flowtechnology > Sectors > Section 19 - Festo > Servo-pneumatic control components > Sensor interfaces

Refine Products

Diagnosis function
- Display via LED ( 2 items )
Assembly position
- Any ( 2 items )
Short circuit strength
- Yes ( 2 items )
Polarity protected
- for SPS plug S1 ( 2 items )
Repetition accuracy
- Min. ±0.1 mm ( 2 items )
Analog output
- 0 - 10 V. according to EN 61131-2 ( 1 items )
- 4 - 20 mA. according to EN 61131-2 ( 1 items )
Power supply requirement
- Safety extra-low voltage with safe disconnection (PELV) ( 2 items )
Debouncing time, inputs
- 3ms ( 2 items )
Nominal operating voltage DC
- 24V ( 2 items )
Power failure buffering for logic voltage
- 10ms ( 2 items )
Residual ripple
- 4 Vss ( 2 items )
Current consumption at nominal operating voltage
- 20-30mA ( 2 items )
Permissible voltage fluctuation
- +/- 25 % ( 2 items )
Authorization
- RCM Mark ( 2 items )
CE symbol (see declaration of conformity)
- according to EU-EMV guideline ( 2 items )
Corrosion resistance classification CRC
- 1 - Low corrosion stress ( 2 items )
Storage temperature
- -20-70°C ( 2 items )
Relative air humidity
- 95 %. non-condensing ( 2 items )
Protection class
- IP65. IP67 ( 2 items )
Ambient temperature
- 0-55°C ( 2 items )
Product weight
- 128g ( 2 items )
Linearity error, FS
- 0.2% ( 2 items )
Characteristic curve, outputs
- according to EN 61131-2 ( 2 items )
Input characteristics
- according to EN 61131-2 ( 2 items )
Input circuit logic
- PNP (positive-switching) ( 2 items )
Switching logic, outputs
- PNP (positive-switching) ( 2 items )
Electrical connection, measuring system
- M12. 8-pin. Plug socket ( 2 items )
Electrical connection, SPS
- M12. 8-pin. Plug ( 2 items )
Mounting type
- with through hole ( 2 items )
Material housing
- PBT-reinforced ( 2 items )
Diagnosis function
- Display via LED ( 3 items )
Assembly position
- Any ( 3 items )
Power supply requirement
- Safety extra-low voltage with safe disconnection (PELV) ( 2 items )
Nominal operating voltage DC
- 24V ( 3 items )
Power failure buffering
- 10ms ( 2 items )
Residual ripple
- 4 Vss ( 2 items )
- 5 % ( 1 items )
Current consumption at nominal operating voltage
- 40 - 50 mA ( 2 items )
Permissible voltage fluctuation
- +/- 25 % ( 2 items )
Authorization
- RCM Mark ( 3 items )
CE symbol (see declaration of conformity)
- according to EU-EMV guideline ( 3 items )
Continuous shock resistance per DIN/IEC 68, parts 2 - 82
- Tested in accordance with severity level 2 ( 2 items )
Corrosion resistance classification CRC
- 1 - Low corrosion stress ( 3 items )
Storage temperature
- -20-70°C ( 2 items )
Relative air humidity
- 95 %. non-condensing ( 2 items )
Protection class
- IP67. Connected plug connector ( 2 items )
- IP65 ( 1 items )
Vibration resistance per DIN/IEC 68, parts 2 - 6
- Tested in accordance with severity level 2 ( 2 items )
Ambient temperature
- 0-55°C ( 2 items )
- -5-50°C ( 1 items )
Product weight
- 128g ( 2 items )
- 350g ( 1 items )
Electrical connection, measuring system
- M12. 5-pin. Plug socket ( 1 items )
- M12. 8-pin. Plug socket ( 1 items )
Control interface electrical connection
- M9. 5-pin. Plug ( 2 items )
Control interface
- Digital. CAN bus with Festo protocol. Without terminating resistor ( 2 items )
Mounting type
- with through hole ( 2 items )
- with through-hole for M4 screw ( 1 items )
Material housing
- PBT-reinforced ( 2 items )
- Anodised wrought aluminium alloy ( 1 items )
Instructions for use
- The product is suitable for industrial purposes only. Measures for interference suppression may be required in residential areas. ( 1 items )
Polarity protected
- Yes ( 1 items )
Output frequency
- HTL signal: max. 450 Hz. TTL signal: max. 7200 Hz ( 1 items )
Operating voltage range DC
- 20.4-30V ( 1 items )
Duty cycle
- 100 % ( 1 items )
Max. electrical power consumption
- 6W ( 1 items )
Current consumption with load-free outputs
- 50mA ( 1 items )
Current-carrying capacity per output
- 50mA ( 1 items )
KC mark
- KC-EMV ( 1 items )
Vibration resistance
- Transport application test at severity level 2 in accordance with FN 942017-4 and EN 60068-2-6 ( 1 items )
Shock resistance
- Shock test with severity level 2 in accordance with FN 942017-5 and EN 60068-2-27 ( 1 items )
Protection against direct and indirect contact
- Safety extra-low voltage with safe disconnection (PELV) ( 1 items )
Note on degree of protection
- in assembled condition ( 1 items )
Signal range
- HTL signal: high: min. 18 V; low: max. 2 V. TTL signal: high: min. 2.4 v; low: max. 0.4 V ( 1 items )
Electrical connection, output, function
- TTL ( 1 items )
Electrical connection, output, connection type
- Plug ( 1 items )
Electrical connection, output, connection technology
- M12x1, A-coded in accordance with EN 61076-2-101 ( 1 items )
Electrical connection, output, number of pins/wires
- 8 ( 1 items )
Electrical connection for output 2, function
- HTL ( 1 items )
Electrical connection for output 2, connection type
- Plug ( 1 items )
Electrical connection for output 2, connection technology
- M12x1, A-coded in accordance with EN 61076-2-101 ( 1 items )
Electrical connection for output 2, number of pins/wires
- 5 ( 1 items )
Electrical connection for valve, connection type
- Plug ( 1 items )
Electrical connection for valve, connection technology
- M12x1, A-coded in accordance with EN 61076-2-101 ( 1 items )
Electrical connection for valve, number of pins/wires
- 8 ( 1 items )
Electrical connection for sensor, connection type
- 2x socket ( 1 items )
Electrical connection for sensor, connection technology
- M12x1, A-coded in accordance with EN 61076-2-101 ( 1 items )
Electrical connection for sensor, number of pins/wires
- 8 ( 1 items )
Materials note
- Conforms to RoHS ( 1 items )
Material seals
- FPM. NBR ( 1 items )

Sensor interfaces

Viewing 5 of 5

Sensor interfaces CASM (3)

Measured value converter for DNCI, DDPC (2)

General
About
Products
- Product Range
- New Products
Services
© Copyright 2015 Until Present - All Rights Reserved
Designed by E3Creative, Manchester