Handling modules

About Us
Products
Services
News
Help
Contact

+44 (0) 33 000 22 223

My Basket (0) £ 0.00

Product Sections

1 - Hydraulics
2 - Hydraulic Quick Release Couplings
3 - Pneumatic Quick Release Couplings
4 - Air Preparation Monitor & Test
5 - Festo
6 - KELM Pneumatics
7 - Pneumatic & Vacuum Equipment
8 - Valves
9 - Ring Main Systems
10 - Adaptors & Fittings
11 - Stainless Steel
12 - Malleable Iron
13 - Hose, Tubing & Couplings
14 - Clamps & Clips
15 - Sprays & Adhesives
16 - Blow Guns & Vacuum
17 - Wash Down & Fuelling
18 - Air Tools
19 - Tools, Hardware & PPE

Download Microsoft Edge

Looks like you're using Internet Explorer

We no longer support this browser and recommend updating to the latest version of Microsoft Edge .

Flowtechnology > Sectors > Section 19 - Festo > Handling systems > Handling modules

Refine Products

Size
- 12 ( 8 items )
- 16 ( 8 items )
- 25 ( 8 items )
Y stroke
- 52-68mm ( 8 items )
- 90-110mm ( 8 items )
- 130-170mm ( 8 items )
Z stroke
- 20-30mm ( 8 items )
- 35-50mm ( 8 items )
- 50-70mm ( 8 items )
Z stroke, working stroke
- 15mm ( 8 items )
- 20mm ( 8 items )
- 25mm ( 8 items )
Cushioning
- CC: Shock absorber at both ends. Soft characteristic ( 24 items )
Assembly position
- Guide rail. Vertical ( 24 items )
Mode of operation
- double-acting ( 18 items )
Design structure
- Cross-guide. Swivel module. guided motion sequence ( 6 items )
- Cross-guide. Swivel module. Wait position alternatively on left. guided motion sequence ( 12 items )
- Drive shaft. Cross-guide. guided motion sequence ( 6 items )
Position detection
- For proximity sensor ( 24 items )
Protection against torque/guide
- Cross-guide ( 24 items )
Working pressure
- 4-8bar ( 18 items )
Minimum cycle time
- 0.6s ( 8 items )
- 0.8s ( 8 items )
- 1s ( 8 items )
Repetition accuracy
- ±0,01 mm ( 16 items )
- ±0,02 mm ( 8 items )
Operating medium
- Compressed air in accordance with ISO8573-1:2010 [7:-:-] ( 24 items )
Note on operating and pilot medium
- Lubricated operation possible (subsequently required for further operation) ( 24 items )
Ambient temperature
- 0-60°C ( 24 items )
Max. torque Mx dynamic
- 1.1Nm ( 8 items )
- 2.4Nm ( 8 items )
- 3.2Nm ( 8 items )
Max. torque Mx static
- 5Nm ( 8 items )
- 10Nm ( 8 items )
- 15Nm ( 8 items )
Max. torque My dynamic
- 1.1Nm ( 8 items )
- 2.4Nm ( 8 items )
- 3.2Nm ( 8 items )
Max. torque My static
- 5Nm ( 8 items )
- 10Nm ( 8 items )
- 15Nm ( 8 items )
Max. torque Mz dynamic
- 1.1Nm ( 8 items )
- 2.4Nm ( 8 items )
- 3.2Nm ( 8 items )
Max. torque Mz static
- 5Nm ( 8 items )
- 10Nm ( 8 items )
- 15Nm ( 8 items )
Maximum effective load
- 0.5kg ( 8 items )
- 1kg ( 8 items )
- 1.5kg ( 8 items )
Theoretical force at 6 bar
- 40N ( 8 items )
- 50N ( 8 items )
- 65N ( 8 items )
Product weight
- 1900g ( 3 items )
- 2600g ( 3 items )
- 1800g ( 1 items )
- 2500g ( 1 items )
- 3300g ( 3 items )
- 4600g ( 3 items )
- 3100g ( 1 items )
- 4300g ( 1 items )
- 6400g ( 3 items )
- 7600g ( 3 items )
- 6200g ( 1 items )
- 7400g ( 1 items )
Mounting of front unit
- with through hole ( 24 items )
Mounting type
- with through hole. With slot nuts ( 24 items )
Pneumatic connection
- M5 ( 18 items )
Materials note
- Free of copper and PTFE ( 12 items )
Material sub-base
- Wrought Aluminum alloy ( 24 items )
Material cross-guide
- Heat-treatment steel ( 24 items )
Material side components
- Wrought Aluminum alloy ( 24 items )
Maximum Z-stroke, wait position
- 15mm ( 4 items )
- 25mm ( 8 items )
Pneumatic connection, wait position
- M3 ( 4 items )
- M5 ( 8 items )
Max. drive torque at drive shaft
- 1.25Nm ( 2 items )
- 2.5Nm ( 2 items )
- 5Nm ( 2 items )
Max. axial force at drive shaft
- 18N ( 2 items )
- 30N ( 2 items )
- 50N ( 2 items )
Max. radial force at drive shaft
- 45N ( 2 items )
- 75N ( 2 items )
- 120N ( 2 items )
Working stroke
- 9-15mm ( 6 items )
- 15-25mm ( 6 items )
- 20-35mm ( 6 items )
Size
- 10 ( 6 items )
- 12 ( 6 items )
- 16 ( 6 items )
Max. linear stroke at 90° swivel angle
- 90/90 mm ( 6 items )
- 142/142 mm ( 6 items )
- 175/175 mm ( 6 items )
Z stroke
- 80-100mm ( 18 items )
Cushioning
- CC: Shock absorber at both ends. Soft characteristic ( 12 items )
- noise absorption through buffer ( 6 items )
Assembly position
- Any ( 18 items )
Design structure
- Swivel actuator. linear guide plus rotating bearing. guided motion sequence ( 12 items )
- Drive shaft. linear guide plus rotating bearing. guided motion sequence ( 6 items )
Position detection
- For proximity sensor ( 18 items )
Working pressure
- 4-8bar ( 12 items )
Minimum cycle time
- 0.6s ( 4 items )
- 0.8s ( 4 items )
- 1s ( 4 items )
Repetition accuracy, end positions
- +/-0,02 mm ( 18 items )
Operating medium
- Compressed air in accordance with ISO8573-1:2010 [7:-:-] ( 12 items )
Note on operating and pilot medium
- Lubricated operation possible (subsequently required for further operation) ( 12 items )
Ambient temperature
- 0-60°C ( 18 items )
Max. torque Mx
- 0.6Nm ( 6 items )
- 1.5Nm ( 6 items )
- 2.5Nm ( 6 items )
Max. torque My
- 0.6Nm ( 6 items )
- 1.5Nm ( 6 items )
- 2.5Nm ( 6 items )
Max. torque Mz
- 0.6Nm ( 6 items )
- 1.5Nm ( 6 items )
- 2.5Nm ( 6 items )
Maximum effective load
- 0.5kg ( 6 items )
- 1kg ( 6 items )
- 1.5kg ( 6 items )
Maximum process force in Y direction
- 30N ( 6 items )
- 35N ( 6 items )
- 50N ( 6 items )
Theoretical force at 6 bar
- 30N ( 4 items )
- 35N ( 4 items )
- 55N ( 4 items )
Product weight
- 1250g ( 1 items )
- 1350g ( 1 items )
- 1200g ( 1 items )
- 1300g ( 1 items )
- 2840g ( 1 items )
- 3040g ( 1 items )
- 2800g ( 1 items )
- 3000g ( 1 items )
- 5100g ( 1 items )
- 5400g ( 1 items )
- 4900g ( 1 items )
- 5200g ( 1 items )
- 1360g ( 1 items )
- 3060g ( 1 items )
- 5500g ( 1 items )
- 1460g ( 1 items )
- 3260g ( 1 items )
- 5800g ( 1 items )
Mounting type
- With through-hole and centering sleeve ( 18 items )
Pneumatic connection
- M3 ( 4 items )
- M5 ( 8 items )
Materials note
- Free of copper and PTFE ( 12 items )
Material stops
- High alloy steel ( 18 items )
Material spring pressure piece
- High alloy steel ( 18 items )
Material sub-base
- Wrought Aluminum alloy. Anodized ( 18 items )
Material bracket
- Wrought Aluminum alloy. Anodized ( 18 items )
Material cross-guide
- Heat-treatment steel ( 18 items )
Material swivel lever
- Case-hardened steel. Burnished ( 18 items )
Material slotted guide plate
- Case-hardened steel. Burnished ( 1 items )
- Case-hardened steel. Hardened ( 17 items )
Material sensor rail
- Wrought Aluminum alloy. Anodized ( 18 items )
Material bar
- Wrought Aluminum alloy. Anodized ( 18 items )
Material adjusting screw
- High alloy steel ( 18 items )
Material cover
- Wrought Aluminum alloy. Anodized ( 9 items )
Max. drive torque at drive shaft
- 0.85Nm ( 2 items )
- 12.25Nm ( 1 items )
- 1.25Nm ( 1 items )
- 2.5Nm ( 2 items )
Max. axial force at drive shaft
- 10N ( 2 items )
- 18N ( 2 items )
- 30N ( 2 items )
Max. radial force at drive shaft
- 30N ( 2 items )
- 45N ( 2 items )
- 75N ( 2 items )
Maximum Z-stroke, wait position
- 10mm ( 2 items )
- 15mm ( 2 items )
- 25mm ( 2 items )
Pneumatic connection, wait position
- M5 ( 6 items )

Handling modules

Viewing 42 of 42

Handling modules HSP (24)

HSW handling units (18)

General
About
Products
- Product Range
- New Products
Services
© Copyright 2015 Until Present - All Rights Reserved
Designed by E3Creative, Manchester